1、對于自動卸鐵式除鐵機，啟動時人員不要站在其正前方向以免其攜帶鐵器傷人。

1. For automatic iron unloading machine, when starting, do not stand in front of it, so as not to bring iron to hurt people.

2、運轉中應注意其運行是否平穩，是否有異常雜音以及其除鐵情況、，注意卸鐵膠帶不得跑偏、劃裂。輸煤皮帶運轉期間，一般不停除鐵機。

2, the operation should pay attention to whether it is running smoothly, whether there is abnormal noise and its iron removal, and pay attention to unloading iron tape shall not be deviation, split. During the operation of the coal conveyer belt, the iron separator is usually stopped.

3、運轉中密切注意勵磁體的溫度和風扇運轉情況，當超過100攝氏度時必須停機檢查。

3, in operation, pay close attention to the temperature of the magnet and fan operation, when more than 100 degrees Celsius, must stop inspection.

4、盤式除鐵機卸鐵操作方法：按下配電柜上向前或向后按鈕，行車電磁鐵到合適位置，按下勵磁停止按鈕，待盤體上所有鐵器卸凈后再將其返回原有位置，開啟礪磁。

4, disc type iron removing machine iron unloading operation method: press the power distribution cabinet on the forward or backward button, driving electromagnet to the proper position, press the stop button to block excitation, all the iron unloading net after back to its original position, open the excitation.

5、運輸煤皮帶停車后，將其吸起的鐵器全部卸凈后，再停除鐵機。除鐵機停車期間應檢查其運轉部位是否缺油，應及時維護和保養。

5, after the transport of coal belt parking, the iron will be lifted out of all, and then stop the iron machine. During the period of stopping the iron machine, the running parts should be inspected for lack of oil, and should be maintained and maintained in time.